Ethernet Management Connection - ATTO Technology XstreamCORE ET 8100T Installation And Operation Manual

Ethernet Data Connection
Ethernet technology offers a variety of cabling options. The
type of cable required varies depending upon the application,
environment and distance.
The 10Gb Ethernet data ports provide host connectivity. The
table shows optical connections:
Visit the ATTO web store at
http://www.atto.com/store
The table shown is for optical cabling with SFP+
modules
For RJ45 interface, Cat6a (or) greater at a maximum
of 30m is recommended.

Ethernet Management Connection

The 100/1000 RJ-45 Ethernet port provide dedicated
monitoring, management, and diagnostics capabilities,
supporting CLI over SSH, and File Transfer over SFTP.
When you connect an Ethernet cable between the
XstreamCORE and a 100/1000 RJ-45 connection, you may
need a crossover cable connecting directly to a computer.
to purchase compatible cables.
10Gb/s
Cable Type
50 µm OM2
50 µm OM3 300m
50 µm OM4 400m
Long wave operation requires long wave SFP+
modules (not supplied).
1GbE is not supported on the data port
The ATTO XstreamCORE auto detects the Ethernet speed by
default.
It is recommended to use a good quality Cat 5e or
better cable
82m