Table of Contents
Advertisement
1 ATTO XstreamCORE ET 8100T Overview
The ATTO XstreamCORE ET 8100T is an accelerated intelligent bridging device that extends tape storage connectivity to up to 4 SAS-
LTO Tape drives over a 10Gb Ethernet network.
ATTO XstreamCORE® 8100T intelligent bridges add shared
storage benefits to SAS storage but at direct attached speeds.
XstreamCORE provides secured and remote access through
accelerated Ethernet interface to SAS tape storage providing
architectural simplicity, operational flexibility, and overall
system efficiency.
Features and Benefits
The ATTO XstreamCORE ET 8100T is a 10-Gigabit Ethernet to
12-Gigabit SAS storage controller configured with two
independent 10Gb Ethernet ports and a single 12Gb x4 mini-
SAS connector.
Designed to integrate industry-leading performance and SAN
capabilities into the future generation of storage solutions,
the XstreamCORE 8100T uses ADSA™ (ATTO Distributed
Software Architecture), a cooperative multi-tasking operating
system with light-weight transactions and high-performance
memory management. ADSA is optimized for storage
application performance and maximum efficiency in
enterprise level and application workflows looking to
incorporate SAS Tape drives in their Ethernet network.
• Supports accelerated iSCSI over TCP/IP
• Integrated multi-core ARM 64bit Processor
iSCSI is only accessible on the 10Gb data ports - the 1Gb port for management only.
Use the 8100T to aggregate and share tape storage with the
knowledge that it has undergone qualifications with industry
leading storage and network infrastructure products. Easily
integrate the 8100T into IT and Media & Entertainment
workflows to provide lower operational costs through use of
patented technologies like SpeedWrite™ and Advanced Data
Streaming™ and built-in tools that enable configuration,
device management, and troubleshooting.
• Two independent 10Gb Ethernet SFP+ ports
• Supports IPv4 and IPv6 connections
• Support for connection to up to 4 iSCSI initiators with two
sessions each (8 total sessions supported)
• Single 12Gb SAS x4 mini-SAS HD connector
• SAS auto-negotiates to 6Gb or 12Gb
• Supports up to 4 SAS Tape Drives (LTO 7, 8, 9)
• Automatic SAS LUN Mapping & Management
• Support for LTFS (Linear Tape File System)
• Support for SAS TLR (Transport Layer Retries)
• System monitoring hardware
• On-chip thermal monitoring
• Dedicated 1GbE RJ45 Management port
• ACL (Access Control List) Support
• CLI over SSH
• Firmware Update over SFTP
• SpeedWrite™ technology for accelerated write
performance
Advertisement
Table of Contents
