Configuring Peer To Peer - Viking E-32T Series Product Manual

Ip intercoms with secure sip and web ui

Table of Contents

11 - Configuring Peer to Peer (Self-Registration)

The E-32T-SS-IP can be set up to make SIP calls without a SIP Server. To enable this feature enter "127.0.0.1" as the

"Registrar" and set a "Phone Number/User ID" (this can be any letter/digit combination). This string must be dialed along

with the IP Address of the E-32T-SS-IP device to make an Inbound call.

For example, to call the E-32T-SS-IP devices

shown right, a SIP endpoint would dial

"x32@192.168.0.11" where "192.168.0.11" is the

IP Address of the X-Series device.

Peer to Peer Speed Dial Numbers

Outbound Peer to Peer calls are made by dialing

directly to the IP Address of an endpoint using the

"Phone Number" or "Extension Name".

See the screenshot to the right as an example.

The Extension Name is "1000" and the IP Address

of the SIP Endpoint to be called is "192.168.0.10".

Table of Contents

E-32t-ss-ip E-32t-ss-ip-ewp