Table of Contents
Advertisement
Configure Tab
RC-4A Network Relay Control
The External Relay page will show you a list of
RC-4A devices on your network. In order to connect
an X-Series Device to one of them, click on the '+'
button near under the Select column.
The RC-4A's IP address and MAC address will be
copied into the text boxes. Enter your RC-4A user
name and password (the RC-4A defaults are
admin:viking). Click 'Apply' to save the changes. Any
relay activations will trigger the RC-4A relay
matching the 'Mirror Index'.
If no RC-4A units are discovered, check your
connections, and make sure the RC-4A is on the
same LAN as the X-Series device.
Setting
Description
Turns Network Relay Interaction on or off.
Enabled
MAC Address
The MAC address of the RC-4A. Use the '+' button to copy this value into the field.
IP Address
The IP Address of the RC-4A.
RC-4A user name
The user name used to authenticate with the RC-4A.
RC-4A password
The password used to authenticate with the RC-4A.
Mirror Index
The relay on the RC-4A you would like to control (1-4).
17
Factory Default
Disabled
Blank
Blank
admin
viking
1
Advertisement
Table of Contents
