Configuring Peer To Peer - Viking X-205 Series Product Manual

11 - Configuring Peer to Peer (Self-Registration)
The X-205 can be set up to make SIP calls without a SIP Server. To enable this feature enter "127.0.0.1" as the
"Registrar" and set a "Phone Number/User ID" (this can be any letter/digit combination). This string must be dialed along
with the IP Address of the X-205 device to make an Inbound call.
For example, to call the X-205 devices shown
right, a SIP endpoint would dial
"x35@192.168.0.11" where "192.168.0.11" is the
IP Address of the X-Series device.
Peer to Peer Speed Dial Numbers
Outbound Peer to Peer calls are made by dialing
directly to the IP Address of an endpoint using the
"Phone Number" or "Extension Name".
See the screenshot to the right as an example.
The Extension Name is "1000" and the IP Address
of the SIP Endpoint to be called is "192.168.0.10".
22