LifeGear 97085M Owner's Manual page 17

1A
Step 8
Remove three Hexagon Head Bolts (87), three Spring Washers (34), and three Washers
(35) from the Vibration Control Head (1A). Remove bolts with the Multi Hex Tool with
Phillips Screwdriver provided..
Attach the Vibration Control Head (1A) onto the top end of the Vibration Control Head
Support Tube (3) with three Hexagon Head Bolts (87), three Spring Washers (34), and
three Washers (35) that were removed. Tighten bolts with the Multi Hex Tool with Phillips
Screwdriver provided..
35
34
87
16
1A
35
3
34
87