Introduction; Purpose; Scope; Equipment Overview - Juniper EX4100-F- 24P/T Quick Start Manual

Dentification of volatile and non-volatile storage and sanitization of system components
Table of Contents

Advertisement

1

INTRODUCTION

1.1 Purpose

The purpose of this document is to provide direction to identify and remove all
non-volatile (NV) storage from the Juniper Networks EX4100-F-24P/T platform.
Non-Volatile (NV) storage is a system memory that can store user data
information and system configuration data even when system not powered.
Volatile (V) storage is a system memory that only retains data or its contents
while system powered but when system powered off or interrupted, its data or
contents are immediately lost.

1.2 Scope

This document only addresses the EX4100-F-24P/T platform. While other
platforms offered by Juniper Networks may contain similar hardware
components, this document only applies to these devices. Furthermore, this
document only provides direction for the identification and removal of NV
storage components. It does not address destruction procedures for those
components. As all the NV storage components used in the EX4100-F-24P/T
are commercial off-the-shelf (COTS) components, directions for destruction of
those components are left to the governing Department, Agency, or Office.
2

EQUIPMENT OVERVIEW

2.1 Identification of Chassis

Juniper Networks EX4100-F-24P/T Ethernet Switches provide connectivity for
high-density environments and scalability for growing networks. These
switches can be deployed wherever you need high density of Gigabit Ethernet
ports or redundancy. Typically, EX4100-F-24P/T switches are used in large
branch offices, campus wiring closets, and data centers. In datacenters,
EX4100-F-24P/T switches can be positioned as top-of-rack switches; the top
devices in a rack to provide connectivity for all the devices in the rack. Juniper
Networks SRX Series Ethernet Switches run Junos OS, which provides Layer2
and Layer3 switching, routing, and security services.
The 24-ports EX4100-F-24P/T switch with gigabit ports and provide built-in
Ethernet network ports, 0-23 built-in 1G ports, 0-3 built-in 4x10G SFP+
(Uplink-ports), 0-3 built-in 4x10G SFP+ (Stack ports) Ethernet network ports.
Ethernet network ports support 1Gbps,10Gbps EX4100-F-24P/T is designed to
fit in a standard 19" rack.
Letter of Volatility EX4100-F-24P/T
UNCLASSIFIED
2/2/2023

Advertisement

Table of Contents
loading

Table of Contents