Kenwood DP-3010 Service Manual page 53

DP-3010
ADJUSTMENT
@ The RF and E. Spot Signais during Test Mode (Play).
@ When the Diffraction Grid is correctly adjusted, the E.
Spot trigger (bump) can be confirmed about 12 psec
s o easpheek age Puree after the RF Signal.
oe sittaseneg CHT RE (Picture 4)
eee tebe 1.0Vidiv
hee
Cabby
aaPPELGR ERED Pe er eet e e ©
jyestauysenmmuuugraitane
Ure Atel DCE
ye.
t
CH2 E.Spot
0.1V/div
AC Coupling
only in CH2
(c) Tracking Error Balance Adjustment
@ The RF and T. Error Signals during Test Mode (Focus
ON) {Test Disc Type: 4)
e T. Error is adjusted so that the symmetry is centered at
cH Re OV (Tracking Balance).
1.0V/div (Picture 5)
av)
CH2 T.Error
2.0Vidiv
otv)
(d) Focus Error Balance Adjustment
@ RF Signal during Test Mode (Play)
®@ Should be adjusted so that each center cross point will
be a point, and so that points that cross above and
we... FD senas owas below are clear, as shown in the picture.
\y. ' ' (Picture 6)
Oa ee ee
4.96.0.60.0.609.6.6.69 Resionat
\ (
'
0.5 Vidiv
s\ AYYYAYAN VK)
: . . .
Bw 8 aes a or ir
100