Connection Panel; Connecting The Signal Cable - Eizo CuratOR LX1910 Instructions For Use Manual

Connecting

5.3 Connecting the signal cable

5.2.2 Connection panel

5 V / 1 A USB-B
5 V connector
The monitor has a 5 V output that can be used to supply external devices.
USB ports
The USB-A ports enable communication with external devices.
The USB-B port enables communication between the monitor and a connected PC, or can
be used for service purposes
DVI-I connector
The monitor has a DVI-I connector, which can process digital and analog input signals.
DisplayPort (DP) connector
The monitor has a DisplayPort connector, which can process digital input signals.
Power connector
The device's power supply is connected using an appliance plug.
Power switch
The power switch is used to turn the device on and off.
5.3 Connecting the signal cable
CAUTION
Connector
Connectors may only be plugged in or removed by Service when the device is switched
off.
Prerequisite
The monitor has to be installed in the ceiling suspension, wall mount, or stand.
18
USB A DVI-I DisplayPort Power connector Power switch
Instructions for Use, 08/2022
CuratOR LX1910