Table of Contents
Advertisement
Temperature
Settings: "Native" / "6000 K" to "15000 K"(in increments of 100 K) / "sRGB"
This function allows you to adjust the color temperature.
The color temperature is normally used to express the hue of "White" and/or "Black" with a
numerical value. The value is expressed in degrees "K" (Kelvin).
The screen becomes reddish at low color temperatures and bluish at high color
temperatures, similar to the temperatures of a flame. A gain preset value is set for each
color temperature setting value.
Note
• Use the value shown in "K" as reference.
• "Gain" allows you to perform more advanced adjustment (See
• If set to "Native", the image is displayed in the preset color of the LCD panel (Gain: 100% for
each RGB channel).
• When the gain is changed, the color temperature setting changes to "User".
Gamma
Settings: "1.6" – "2.7" / "sRGB"
This function allows you to adjust the gamma. While the brightness of the monitor varies
depending on the video level of the input signal, the variation rate is not directly proportional
to the input signal. Maintaining the balance between the input signal and brightness of the
monitor is referred to as "Gamma correction".
Hue
Settings: "-100" – "100"
This function allows you to adjust hue.
Attention
• Using this function may prevent some color gradations from being able to be displayed.
Saturation
Settings: "-100" – "100"
This function allows you to adjust color saturation.
Attention
• Using this function may prevent some color gradations from being able to be displayed.
Note
• The minimum value (-100) changes the screen to monochrome.
Gain
Settings: "0%" – "100%"
The brightness of each color component (red, green, and blue) is called "gain". The hue of
"white" can be changed by adjusting the gain.
Attention
• Using this function may prevent some color gradations from being able to be displayed.
Advanced Adjustments/Settings | 2
Gain
[} 9]).
9
Advertisement
Table of Contents
