Table of Contents
Advertisement
3 | Administrator Settings
DP Power Save
Settings: "On" / "Off"
Connecting a PC to the DisplayPort connector enables DisplayPort communication, and
thus consumes high power even in the power saving mode. The communication can be
disabled by setting "DP Power Save" to "On". This reduces power consumption in the power
saving mode (the default setting is Off).
Attention
• If "On" is selected, window and icon positions may shift when the monitor is powered back on or
returned from the power saving mode. In such cases, set this function to "Off".
Grayscale Warning
Settings: "On" / "Off"
You can specify whether to display the Grayscale Display Error message to indicate that a
6-bit (64-grayscale) signal has been detected when the DisplayPort signal or USB-C signal
is input at the recommended resolution. If the error message appears, please turn off the
main power, and then turn it on again.
Attention
• Always use with this set to "On" (the default setting is "On").
• Set this to "Off" only when using 6-bit (64 grayscale) display.
Limited Range Warning
Settings: "On" / "Off"
Sets whether or not to display a warning message when a limited range HDMI input signal is
detected. If a warning message appears, change the input signal to full range.
Sharpness Recovery
Settings: "On" / "Off"
EIZO's unique technology called "Sharpness Recovery" improves picture clarity and
displays images that are true to the original source data.
Attention
• After changing the setting, perform a visual check according to the medical standards /
guidelines.
USB-C
Settings: "On" / "Off"
Sets whether or not to display the USB-C input signal as a switchable signal when switching
the input signal with
Ethernet
Settings: "On" / "Off"
You can switch between enabling and disabling of the LAN port of the monitor.
• "On"
Enables the LAN port and allows network connections from PCs connected with USB-C.
20
in the operation guide.
Advertisement
Table of Contents
