Table of Contents
Advertisement
2 | Advanced Adjustments/Settings
Attention
• It takes about 15 minutes for the monitor display to stabilize. Please wait 15 minutes or more
after the monitor power has been turned on or the monitor has recovered from power saving
mode before making adjustments to it.
• The same image may be observed in different colors on multiple monitors due to monitor-specific
characteristics. Make fine color adjustments visually when matching colors across multiple
monitors. Follow the procedure below to adjust and match colors across multiple monitors.
1. Display a white screen on each monitor.
2. Use one of the monitors as a visual reference point to make adjustments to "Brightness",
"Temperature", and "Gain" on the other monitors.
Note
• Use the values shown in "Brightness" and "Temperature" as a guide only.
Mode
Settings: "1-DICOM" / "2-CAL" / "3-Patho" / "4-Custom" / "5-sRGB" / "6-Text"
The display mode can be switched according to the intended use of the monitor.
The mode settings can also be adjusted according to your preference. Select the mode for
adjustment and perform adjustment using the relevant functions.
Hybrid Gamma PXL
Settings: "On" / "Off"
When the Hybrid Gamma PXL function is enabled, this product automatically differentiates
between monochrome and color parts of the same image at a pixel level, and displays a
color image using the gamma value for color image display.
Brightness
Settings: "0%" – "100%"
You can adjust the screen brightness by changing the brightness of the backlight (light
source from the LCD back panel).
Note
• If the image is too bright even when the brightness is set to 0 %, adjust the contrast.
Contrast
Settings: "0%" – "100%"
You can adjust the brightness of the screen by varying the video signal level.
Note
• When the contrast is set to 100 %, all the color gradations are shown.
• When adjusting the monitor, it is recommended to perform brightness adjustment, which does
not lose gradation characteristics, prior to contrast adjustment.
• Perform contrast adjustment in the following cases.
– If the screen is too bright even when the brightness is set to 0 %
8
Advertisement
Table of Contents
