Table of Contents
Advertisement
Quick Links
Instructions for Use
Color LCD Monitor
Important
Please make sure you read the Instructions for Use and Installation
Manual before use.
Please retain this manual for future reference.
• See the Installation Manual for monitor settings and adjustments.
• The latest product information, including the Instructions for Use, is
available on our web site.
www.eizoglobal.com
Advertisement
Table of Contents
Related Manuals for Eizo RadiForce MX317W
Summary of Contents for Eizo RadiForce MX317W
- Page 1 Instructions for Use Color LCD Monitor Important Please make sure you read the Instructions for Use and Installation Manual before use. Please retain this manual for future reference. • See the Installation Manual for monitor settings and adjustments. • The latest product information, including the Instructions for Use, is available on our web site.
- Page 2 EIZO Corporation. EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said information.
-
Page 3: Precautions
PRECAUTIONS PRECAUTIONS Important This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. To personal safety and proper maintenance, please read carefully the "PRECAUTIONS" section and the caution statements on the monitor. - Page 4 PRECAUTIONS Symbol This symbol indicates Importer in the EU Mark signifying compliance with UK regulations UK Responsible Person Authorised representative in Switzerland Authorised representative in the European Community...
- Page 5 A unit placed on an inadequate surface may fall and result in injury. If the unit falls, disconnect the power immediately and ask your local EIZO representative for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electrical shock.
- Page 6 PRECAUTIONS WARNING Use the unit in an appropriate location. Otherwise, fire, electrical shock, or equipment damage may result. • Do not place outdoors. • Do not place in any form of transportation (ships, aircraft, trains, automobiles, etc.). • Do not place in dusty or humid environments. •...
- Page 7 Before installation, make sure that desks, walls, or any other installation surface has adequate mechanical strength. If the unit falls, disconnect the power immediately and ask your local EIZO representative for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electrical shock.
- Page 8 PRECAUTIONS CAUTION CAUTION Check the operational state before use. Begin use after ensuring that there are no problems with the displayed image. When using multiple units, begin use after ensuring that the images are displayed appropriately. CAUTION Securely fix cables / cords that have a fixing feature. If they are not fixed securely, cables / cords may disconnect, and subsequently images may be cut off and your operations may be disrupted.
- Page 9 PRECAUTIONS CAUTION Do not touch the power plug with wet hands. Touching them may result in electrical shock. CAUTION Do not place any objects around the power plug. This is to facilitate disconnecting the power plug in case of a problem to avoid fire or electrical shock.
-
Page 10: Notice For This Monitor
• The specifications noted in this manual are only applicable when using the power cords provided together with the product and EIZO-specified signal cables. • Only use EIZO accessories products specified by EIZO with this product. Precautions for Use • Parts (such as the LCD panel and the fan) may deteriorate if used over extended periods of time. -
Page 11: To Use The Monitor For A Long Time
Notice for this monitor room to a warm room. In that case, do not turn the product on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to the product. To Use the Monitor for a Long Time Quality control •... -
Page 12: Disinfection With Chemicals
• Look at the screen from a proper distance and from a proper angle. Cybersecurity Warnings and Responsibilities • Firmware update should be performed through EIZO Corporation or its distributor. • If EIZO Corporation or its distributor instructs to update the firmware, update it immediately. -
Page 13: Table Of Contents
1.1.7 Space-saving design................16 1.1.8 Monitor operation from the mouse and keyboard ........17 Package Contents....................18 1.2.1 EIZO LCD Utility Disk................18 1.2.2 RadiCS LE ....................18 1.2.3 To use RadiCS LE .................. 19 Controls and Functions ..................20 1.3.1... - Page 14 CONTENTS 4 Specifications ......................32 List of Specifications ................... 32 4.1.1 LCD Panel....................32 4.1.2 Video Signals ..................32 4.1.3 USB......................32 4.1.4 Network....................33 4.1.5 Power...................... 33 4.1.6 Physical Specifications ................33 4.1.7 Operating Environmental Requirements..........33 4.1.8 Transport / Storage Conditions ............... 33 Compatible Resolutions ..................
-
Page 15: Introduction
Introduction | 1 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1.1 Features 1.1.1 Free layout • This product is equipped with PbyP (Picture by Picture) and PinP (Picture in Picture) functions that can display up to three signals at the same time. -
Page 16: Hybrid Monochrome And Color Display
1 | Introduction Note • To display video signals, the connected device must support transmission of video signals (DisplayPort Alt Mode). • To use the charging function, the connected device must support device charging by using USB Power Delivery. • Only when the following USB cables are used, a maximum of 94 W of power can be supplied: –... -
Page 17: Monitor Operation From The Mouse And Keyboard
Introduction | 1 1.1.8 Monitor operation from the mouse and keyboard Using the RadiCS / RadiCS LE monitor quality control software, you can perform the following monitor operations using the mouse and keyboard: • Switching CAL Switch modes • Switching input signals •... -
Page 18: Package Contents
1.2 Package Contents Check that all of the following items are contained in the package. If any of these are missing or damaged, contact your dealer or local EIZO representative. Note • We recommend that you keep the package box and packing materials in the case that you move or transport the product in the future. -
Page 19: To Use Radics Le
Introduction | 1 Monitor operations • Switching CAL Switch modes • Switching input signals • Function that assigns any CAL Switch mode to a part of the screen and displays an image (Point-and-Focus) • Displaying or hiding the PinP sub window (Hide-and-Seek) •... -
Page 20: Controls And Functions
1 | Introduction 1.3 Controls and Functions 1.3.1 Front Approx. 30° 1. Integrated Front Sensor This sensor is used to perform calibration and Grayscale Check. (Movable) 2. Illuminance Sensor This sensor measures environmental illumination. Environmental illumination measurement is performed using the RadiCS / RadiCS LE quality control software. -
Page 21: Back
Introduction | 1 1.3.2 Back 1. Handle This handle is used for transportation. Attention • Firmly hold the monitor by the handle and the bottom while carrying it, and do not put pressure on the LCD panel or drop the monitor. Do not hold the sensor section on the front side of the monitor. - Page 22 1 | Introduction connection or the docking station function (see "Using the Docking Station Function" in the Installation Manual). 11. USB-C connector Connects to the USB-C upstream connector of another monitor (downstream) when setting up a daisy-chain connection. In addition, it can be connected to a peripheral USB device (see "Using the Docking Station Function"...
-
Page 23: Installation / Connection
Installation / Connection | 2 2 Installation / Connection 2.1 Before installation Carefully read PRECAUTIONS [} 3] and always follow the instructions. If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to the composition of the rubber. Check the desk surface before use. 2.1.1 Installation conditions When installing the monitor in a rack, ensure that there is adequate space around the sides, back and top of the monitor. -
Page 24: Connecting Cables
2 | Installation / Connection 2.2 Connecting Cables Attention • Check that the monitor, PC, and peripherals are powered off before connecting. • When replacing the current monitor with this monitor, see 4.2 Compatible Resolutions [} 34] change the PC settings for resolution and vertical scan frequency to those that are available for this monitor, before connecting the PC. - Page 25 Installation / Connection | 2 PbyP (DisplayPort 1 / DisplayPort 2) display Signal cable: PP300-V14 Signal cable: PP300-V14 Attention • For PbyP (DisplayPort 1 / DisplayPort 2) display, it is necessary to set "PbyP Settings" in the Setting Menu. For details, refer to the Installation Manual (on the CD-ROM). •...
- Page 26 2 | Installation / Connection PbyP (One Cable PbyP) display Signal cable: PP300-V14 Signal cable: CC150SS81G-5A Attention • For PbyP (One Cable PbyP) display, connect to the DisplayPort 1 connector or USB-C connector (upstream: ). In addition, it is necessary to set "PbyP Settings" in the Setting Menu. For details, refer to the Installation Manual (on the CD-ROM).
- Page 27 Signal cable: CC150SS81G-5A Signal cable: CP200 (optional, sold separately) Attention • Visit the EIZO web site for information about monitors and graphics boards that can be used for the daisy-chain connection: (www.eizoglobal.com) • To set up a daisy-chain connection, connect to the DisplayPort 1 connector or USB-C connector (upstream: ).
-
Page 28: Turning On The Power
2 | Installation / Connection 3. When you are not using a USB-C connection and when you use RadiCS / RadiCS LE or connect a USB device (peripheral device that supports USB) to the monitor, connect the USB 2.0 cable to the USB-B connector on the monitor and the USB-A connector on the USB 2.0 cable: UU300 When you are using a USB-C connection and when you use RadiCS / RadiCS LE or when you connect a USB device (USB-connected peripheral device) to the monitor, set... -
Page 29: Adjusting The Screen Height And Angle
Installation / Connection | 2 2.4 Adjusting the Screen Height and Angle Hold the top and bottom or left and right edges of the monitor with both hands, and adjust the screen height, tilt and swivel the screen to the optimum position for performing tasks. Attention •... -
Page 30: Picture Problem
• Turn off the main power switch on the back of the monitor, and then turn it on again. Power switch indicator blinks: Orange, Green • Connect using a signal cable specified by EIZO. Then turn off the main power switch on the back of the monitor, and then turn it on again a few minutes later. - Page 31 Manual of the graphics board for details. The message "DP Unsupported" appears on the screen • Check whether the connected cable is a signal cable recommended by EIZO. • Check whether the USB-C of the connected device supports video signal output (DisplayPort Alt Mode).
-
Page 32: Specifications
4 | Specifications 4 Specifications 4.1 List of Specifications 4.1.1 LCD Panel Type IPS (Anti-Glare) Backlight Size 30.5" (77.5 cm) Resolution 4096 dots x 2160 lines Display Size (H x V) 685.7 mm x 361.6 mm Pixel Pitch (H x V) 0.167 mm x 0.167 mm Display Colors 10-bit color (DisplayPort / USB-C): Up to 1.07 billion colors (from a palette of approx. -
Page 33: Network
Sierra (10.12) or later Wired LAN IEEE802.3ab (1000BASE-T) IEEE802.3u (100BASE-TX) IEEE802.3 (10BASE-T) EIZO support will end when OS vendor support ends. 4.1.5 Power Input 100 – 240 VAC ±10 %, 50 / 60 Hz 2.65 – 1.15 A Maximum Power Consumption... -
Page 34: Compatible Resolutions
4 | Specifications 4.2 Compatible Resolutions The monitor supports the following resolutions. ✓: Supported, -: Not supported Resolution Vertical scan DisplayPort / USB-C HDMI frequency (Hz) Single PbyP PinP Single PinP screen display display screen display display display 640 x 480 59.940 ✓... -
Page 35: Appendix
Appendix Appendix Medical Standard • It shall be assured that the final system is in compliance to IEC60601-1-1 requirement. • Power supplied equipment can emit electromagnetic waves, that could influence, limit or result in malfunction of the monitor. Install the equipment in a controlled environment, where such effects are avoided. -
Page 36: Emc Information
WARNING • RadiForce MX317W should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is necessary, the equipment or system should be observed to verify normal operation in the configuration in which it will be used. -
Page 37: Technical Descriptions
Appendix WARNING • Be sure to use the cables attached to the product, or cables recommended by EIZO. Use of cables other than those recommended by EIZO for this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and improper operation. - Page 38 RadiForce MX317W has been tested at the following compliance levels (C) according to the testing requirements (T) for Professional healthcare facility environments and Home healthcare environments specified in IEC60601-1-2. The customer or the user of RadiForce MX317W should assure that it is used in such an environment. Immunity test...
- Page 39 Compliance level Electromagnetic environment - Guidance Portable and mobile RF communications equipment should be used no closer to any part of RadiForce MX317W, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter.
- Page 40 RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which RadiForce MX317W is used exceeds the applicable RF compliance level above, RadiForce MX317W should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating RadiForce MX317W.
- Page 41 (30 cm) between portable and mobile RF communications equipment (transmitters) and RadiForce MX317W. RadiForce MX317W has been tested at the following compliance levels (C) for the required test levels (T) of immunity to the proximity electromagnetic fields in the following RF communication services.
- Page 42 Appendix The customer or the user of RadiForce MX317W can suppress interference caused by proximity magnetic fields by maintaining a minimum distance (15 cm) between the RF transmitter and RadiForce MX317W. RadiForce MX317W has been tested at the following compliance levels (C) for the required test levels (T) of proximity magnetic field immunity.
-
Page 43: Information For Radio Interference
Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. • AC Cord •... - Page 44 Carl-Benz-Straße 3, 76761 Rülzheim, Germany 中国苏州市苏州工业园区展业路8号中新科技工业坊5B 1 Queens Square, Ascot Business Park, Lyndhurst Road, Ascot, Berkshire, SL5 9FE, UK Moosacherstrasse 6, Au, CH-8820 Wädenswil, Switzerland 00N0N404A1 www.eizoglobal.com IFU-MX317W Copyright © 2023 EIZO Corporation. All rights reserved. 1st Edition – September 20th, 2023...
Need help?
Do you have a question about the RadiForce MX317W and is the answer not in the manual?
Questions and answers