Table of Contents
Advertisement
PinP Settings
PinP Settings - PinP
Settings: "Off" / "DisplayPort 2" / "USB-C" / "HDMI"
Selects the input signal for the PinP sub window to be displayed on the screen. If this
function is set to "Off", the PinP sub window will not be displayed.
Note
• When an HDMI signal is displayed in single screen mode, this function cannot be used
(displayed in gray text).
• The display for the signal input to the PinP sub window is enlarged. For this reason, it is not
suitable for displaying medical images.
• If this function is set to anything other than "Off",
the operation switch (
• By using RadiCS / RadiCS LE, you can display or hide the PinP sub window more easily using
the mouse or keyboard (Hide-and-Seek). Refer to RadiCS / RadiCS LE User's Manual for
details.
PinP Settings - CAL Switch Mode
Settings: "DICOM " / "CAL" / "Patho" / "Custom" / "sRGB" / "Text"
You can select the display mode of the PinP sub window.
PinP Settings - Position
Settings: "Upper Right" / "Lower Right" / "Lower Left" / "Upper Left"
You can select the display position of the PinP sub window.
Power Save
Settings: "High" / "Low" / "Off"
You can specify whether the monitor enters the power saving mode according to the PC
status.
Display image
Main Window
) to toggle between displaying and hiding the PinP sub window.
Advanced Adjustments/Settings | 2
Sub
Window
is displayed in the operation guide. Touch
15
Advertisement
Table of Contents
