• "Off"
Disables the LAN port.
Note
• If this is set to "On", it will automatically change to "USB 1" if
1 - USB 2".
Daisy Chain
Daisy Chain - Output
Settings: "On" / "Off"
If this function is set to "On", it will enable a daisy-chain connection from the USB-C
connector (downstream:
Note
• Even if this setting is set to "Off", power can still be supplied to devices connected to the USB-C
connector (downstream:
Daisy Chain - Input
Settings: "DisplayPort 1" / "USB-C"
Sets the signal output from the USB-C connector (downstream:
connection is enabled.
• "DisplayPort 1"
Outputs the signal input to the DisplayPort1 connector ( ).
• "USB-C"
Outputs the signal input to the USB-C connector (upstream:
) of this product to another monitor.
).
Administrator Settings | 3
USB Selection [} 16]
is set to "USB
) when the daisy chain
).
21