2-3. Selecting Display Mode (CAL Switch Mode)
The display mode can be selected according to the monitor application.
Display Modes
Mode
1-DICOM
2-CAL1
3-CAL2
4-Text
Procedure
1. Touch any switch (except
2. Select
from the operation guide.
The Mode menu appears on the lower right.
Example:
3. Modes are changed in sequence each time you select
You can also select
Note
• The Setting menu and Mode menu cannot be displayed at the same time.
Enables display using DICOM
Displays the calibration status using calibration software.
Suitable to display documents, spreadsheets, or other text.
).
1-DICOM
↓ ↑
2-CAL1
↓ ↑
3-CAL2
↓ ↑
4-Text
or
to change modes when the Mode menu is being displayed.
Purpose
®
Part 14-compliant grayscale characteristics.
.
Chapter 2 Adjusting the Screen
√: Can be calibrated
√
√
√
-
9