5-1. Switching among Input Signals
The input signal switches each time
When the signal is switched, the active input port name appears at the top right corner of the screen.
5-2. Setting Input Signal Switching Procedure
Setting
Auto
Manual
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Input Selection" from "Tools", and press
3. Select "Auto" or "Manual" using
4. Press
Note
• When "Auto" is selected for "Input Selection", the monitor's power saving function works only when all
external devices are in the power saving mode.
5-3. Skipping Unused Input Signals
This function allows skipping unneeded input signals when the input signals are switched.
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Input Skip" from "Tools", and press
3. Use
or
to select the input signal to change, and press
4. Select "-" or "Skip" with
5. Press
Note
• You cannot skip all input signals.
42
Chapter 5 Connecting Multiple External Devices
The monitor automatically recognizes the connector through which signals are input and
displays images on the screen accordingly.
When an external device enters the power saving mode, the monitor automatically
displays another signal.
The monitor displays the signal from the selected connector irrespective of whether there
is signal input. Select the input signal for display using the
or .
after completing the setting.
or .
after completing the setting.
is pressed.
Function
.
.
.
.
operation button.
.