Table of Contents
Advertisement
●
Setting input signal switching procedure
Setting
Auto
The monitor recognizes the connector through which PC signals are input.
When a PC is turned off or enters the power saving mode, the monitor automatically
displays another signal.
Manual
The monitor displays the signal from the selected connector despite the signal input. Select
an active input signal with
Procedure
1. Select "Tools" from the Adjustment menu, and press
2. Select "Input Selection" from "Tools", and press
3. Select "Auto" or "Manual" with
4. Press
to exit.
Note
• If you select "Auto", the monitor enters the power saving mode after all the PCs have entered the power
saving mode or have been switched off.
Function
.
.
or .
.
Chapter 6 Reference
31
Advertisement
Table of Contents
