Initial Commissioning; Switching On The Tumble Dryer; Reference To Optional External Devices; Setting The Display Brightness - Miele PDR 914 SOM Operating And Installation Instructions

 Risk of injury or damage to property due to improper installation.
Incorrect installation of the tumble dryer can lead to personal injury or damage to prop-
erty.
Before commissioning the tumble dryer for the first time, make sure it has been installed.
Connect the tumble dryer correctly.
Please observe the instructions in "Installation".
Complete the initial commissioning process. During the initial commissioning process,
you will need to define the settings for daily use of the tumble dryer. Some settings can
only be modified during the initial commissioning process. After that, they can only be
changed by the Miele Customer Service Department.
These settings are also described under "Supervisor level".

Switching on the tumble dryer

Press the  button.

The welcome screen will light up.
Setting the display language
You will be asked to select the display language. You can change the language at any time
(see "Language" under "Supervisor level").
Language
english
deutsch
(CA)
english english
(AU) (GB)
Swipe left or right across the display with your finger until the language you want ap-

pears.
Briefly touch the required language with your finger.

The selected language will be highlighted in orange and the display will change to the next
setting.

Reference to optional external devices

Before initial commissioning, connect the XCI box or slide a communication module into
the slot on the back of the tumble dryer. For this purpose, the tumble dryer must be dis-
connected from the power supply. Then start the commissioning process.
A reference to optional external hardware appears. Confirm the information with the
sensor control.

Setting the display brightness

You will be asked to select the brightness of the display.
español
français
(F)
OK
en - Initial commissioning
OK
75