Table of Contents
Advertisement
Downtime after installation
Damage caused by switching the
appliance on too soon.
This can damage the heat pump.
After setting up the tumble dryer,
wait for at least one hour before
starting a drying program.
Removing the protective foil
and stickers
Remove:
- any protective film from the door
- any stickers from the front and the lid
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
Carrying out the procedure for
initial commissioning outlined
in these instructions
Read "1. Notes on correct laundry
care" and "2. Loading the tumble
dryer".
You can then load the tumble dryer
and select a program as described in
"3. Selecting a program and starting
it".
Initial commissioning
19
Advertisement
Table of Contents
