Miele PDR 914 SOM Operating And Installation Instructions page 96

en - Installation
The gas heating is configured at the factory in line with the gas specifications on the
sticker on the rear of the appliance.
If the gas family is changed, a conversion kit must be requested from the Miele Cus-
tomer Service Department (please specify the appliance type, serial number, gas family,
gas group, gas connection pressure and country of installation). Follow the installation in-
structions. This conversion may only be carried out by a registered specialist.
 Risk of electric shock and injury due to using the tumble dryer without the complete
casing.
If the casing is dismantled, it is possible to come into contact with live or rotating ma-
chine parts.
Once the tumble dryer has been installed, replace all the casing parts that were re-
moved.
96