Table of Contents
Advertisement
The unit can be put into a Test mode, this is done through the SERVICEMAN menu accessed as above.
In the Test mode menu, there are a couple options that can be selected in this menu, these include testing
This will allow the installer to check the unit has been wired correctly, there is also a handy air purge
function within this menu. We recommend that the air purge function is carried out before initially starting
Enter SERVICEMAN mode using the password as
detailed in the previous section.
Scroll down and Select Test Run with
Once in Test Run menu, scroll down and select
Air Purge with
purge
Mode until exited.
During this process any auto air vent within the
unit should be open and any external auto air
vent, the pressure should be observed
throughout the venting process and topped up
as required.
To return to the home screen press Back until the
home screen is displayed.
If point check is selected.
A number of outputs can be tested manually.
Scroll down to the required Output and turn
on/off using the
Press Back until back at the home screen once
completed.
11
www.seconrenewables.com
TEST MODE
the unit. Please Find below the details on carrying out this process.
OK
OK
the unit will now run-in air
ON/OFF
button
info@seconrenewables.com
of all Outputs.
0191 516 6553
Advertisement
Table of Contents
