Installation into a Rack with Threaded Screw Holes
Procedure
After installing the appropriate brackets on the chassis:
Repeat the process for each POTS splitter chassis. POTS splitter chassis can be
mounted directly on top of each other.
6051-A2-GZ40-10
1. Determine where the chassis will be placed in the rack.
2. Line up the chassis mounting brackets with the front rail holes.
3. Loosely install the bottom screws first and then the top screws.
Front Rail
4. Tighten all screws firmly with a Phillips screwdriver.
July 2002
Screw
99-15435-01
9