Table of Contents
Advertisement
Cabling
Procedure
To cable the BitStorm 6051 POTS splitter:
The 48-port BitStorm 4800 and two 6051 POTS splitters are pictured.
See
Your CPE modems may require in-line filters. Consult your modem
documentation.
12
1. Connect the DSL interface to the DSL PORTS connector of a BitStorm 4800.
The 24-port BitStorm 4800 has one DSL PORTS connector on its rear panel,
and the 48-port BitStorm 4800 has two connectors.
2. Connect the Loop interface to the in-building POTS and ADSL CPE.
3. Connect the PSTN interface to the PBX or PSTN.
POTS
Splitters in
1-Slot
Chassis
48
RTS 25-
DSL PO
TS 1-24
DSL POR
Rear View of
BitStorm 4800
Cables You Need
on page 3 for information about POTS splitter cabling.
July 2002
Connecting
Block
To In-Building
POTS and ADSL
Endpoint Equipment
BitStorm
4800
02-17159
6051-A2-GZ40-10
Advertisement
Table of Contents
