Table of Contents
Advertisement
1-Slot 5011 POTS Splitter Chassis Package Checklist
Verify that your 1-slot POTS splitter chassis package contains the following:
4
1-slot POTS splitter chassis
Two brackets for 19 racks and two brackets for 23 racks
Small plastic bag with:
— Six #10-32 x 1/4 Phillips flat-head mounting screws
— Four #10-32 x 1/2 Phillips-head mounting screws
— Four #12-24 x 1/2 Phillips-head mounting screws
— Four #12-24 self-retaining nuts
— Four black rubber feet
POTS Splitter
1-Slot Chassis
NOTE:
If your 1-slot 5011 POTS splitter chassis is being placed on a tabletop, install
the rubber feet as shown above. Discard the rubber feet for a rack-mounted
chassis.
July 2002
Placement of
Rubber
Feet
02-17153
6051-A2-GZ40-10
Advertisement
Table of Contents
