Table of Contents
Advertisement
POTS Splitter Chassis Installation
Both the POTS splitter chassis and the BitStorm 4800 are shipped with mounting
brackets that allow them to be mounted in a 19 (483 mm) or 23 (584 mm)
cabinet or rack.
In preparation for bracket and chassis installation, determine:
T
T
T
T
T
The 48-port BitStorm 4800 and two 6051 POTS splitters are pictured.
6
Whether the equipment will be rack-mounted.
Width of the rack: 19 (483 mm) or 23
Chassis position in the rack: center-mounted or front-mounted.
Center-mounting is recommended for convenient access to cables.
Whether the rack has mounting rails with threaded or non-threaded screw
holes.
The number of POTS splitters required. The BitStorm 4800 comes in a 24-port
and a 48-port model, requiring one or two POTS splitter chassis, respectively.
4
RT S 1-2
DS L PO
Rear
NOTE:
Install chassis in the rack from the bottom up to maintain stability.
July 2002
584 mm).
-48
RT S 25
DS L PO
LIN K
DO WN
Gig E
K
UP LIN
Gig E
Front
POTS Splitter
Card in 1-Slot
Chassis
BitStorm 4800
N
POS ITIO
STA CK
02-17158
6051-A2-GZ40-10
Advertisement
Table of Contents
