Configuring The Server Software - Barco iQ Pro R500 R9010221 Owner's Manual

15. iQ Network
Image 15-14

15.4.5 Configuring the Server software

Internal network connection
The internal connection ( firmware connection) between the projector controller and the single board computer uses fixed IP ad-
dresses.
The IP address of the SBC can be found in control panel
• SBC: IP address = 192.168.42.51, subnet mask = 255.255.255.248
Projector Controller's IP address = 192.168.42.50
Image 15-15
140 R5976694 IQ PRO R500 01/02/2007