Table of Contents
Advertisement
Installation procedures
3.8 Software update
CAUTION: Do not power off or unplug the projector while the software update is ongoing.
How to update the software using the web interface.
1.
Power on the projector.
2.
Download the latest firmware file ( format .iso) from Barco's website. The firmware can be downloaded for
free from Barco's website, (URL: http://www.barco.com). Click on myBarco and log in to get access to
secured information. Registration is necessary.
If you are not yet registered, click on New to myBarco and follow the instructions. With the created login
and password, it is possible to log in where you can download the software.
3.
Connect your computer to the projector, using a LAN cable.
4.
Browse to the IP address of the projector (e.g. the default 192.168.1.100).
The login screen will be displayed.
Image 3–17 Example of the login page
5.
Log in, using the following (default) settings:
•
Username: admin@g50
•
password: admin@g50
Tip: It is advised to change the username and password once you have logged in. It is also
advised to use a strong password.
6.
Navigate to System Settings > Upgrade (reference 1).
The upgrade page will be displayed.
42
R5916677 /00
G50
Advertisement
Table of Contents
