Installing The I/O Card - Paradyne 9261 Installation Instructions Manual

Installing the I/O Card

The NAM's I/O card provides the COM port, network, and
DTE connections. The I/O card inserts directly behind the NAM
that it supports. Slot numbers are identical (in this case, Slot 01)
to facilitate correct installation.
1. Remove the I/O card from the shipping box. Handle only
by the top and bottom edges to avoid damaging the card.
2. At the rear of the housing, align the I/O card with the
upper and lower tracks of the slot. Push gently towards
the midplane until it stops and you cannot push the card
any further.
Access Carrier
3. There are two captive screws on the I/O card. Using a
screwdriver, alternately tighten each screw until the
screws are all the way in.
Screws
Rear View
5-Slot
Screws
Screws
4
T 1
2-Slot
98-15979a
NAM
Rear Panel
D U
A L
N A
M
N E
T
1
NET 1
D B
M
DBM
(For
Future
N E
Use)
T
2
NET 2
P O
R T
1
Port 1
P O
R T
2
Port 2
COM
C O
M
98-15637-01