Paradyne 9261 Installation Instructions Manual page 10

Network 1 and Network 2 Interface LEDs
Label Indication
SIG Signal
OOF Out of Frame
ALM Alarm
Port 1 and Port 2 LEDs
Label Indication
1-OK Operational
2-OK Status
Color What It Means
Green ON – A recoverable signal is present on
OFF – The signal cannot be recovered
Yellow ON – At least one OOF was detected
OFF – No OOFs were detected during the
Yellow ON – An alarm condition is present on the
OFF – No alarm condition is present on
Color What It Means
Green ON – The interchange circuits for the port
OFF – The port is idle. Occurs if the port is
10
the Network 1/Network 2 interface.
from the Network 1/Network 2
interface. An LOS condition exists.
during the sampling period.
sampling period.
Network 1/Network 2 interface.
Current alarm conditions:
H
Loss of Signal ( LOS )
H
Loss of Frame (LOF)
H
Excessive Error Rate (EER)
H
Yellow Alarm
H
Alarm Indication Signal (AIS)
the Network 1/Network 2 interface.
are in the correct state to transmit
and receive data.
disabled, if an EDL Out of Frame or
EER condition is present, if a DCLB
is active, or if the port is configured
to monitor DTR and/or RTS and the
lead(s) is not asserted.