Connecting the COM Port to a User Interface
1. Insert the 8-pin end of the cable into the COM port.
2. Insert the other end of the cable into the user interface (VT100-compatible terminal
emulation) connector.
3. Press Enter on the keyboard to display the Main Menu. If you need to configure for
other than a direct link, see the Technical Reference.
COM Port-to-Terminal/Printer
COM Port-to-PC Cable
Set the speed of the async (VT100-compatible) terminal so
*
it matches the NAM's factory-loaded data rate of 19.2 kbps,
character length set to 8, parity set to None, and stop bits
set to 1. The flow control should be set to None or
Hardware.
Cable or
*
COM
P O
R T
2
C O
M
6
496-15052-01