DFI CS630-Q370 User Manual page 63

Step 3: Create a RAID Volume
1. Go to the "Advanced" menu of the AMI BIOS and select "Intel(R) Rapid Storage Technol-
ogy".
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Main
Advanced Chipset Security Boot Save & Exit
RC ACPI Settings

 CPU Confi guration

 Power & Performance

 PCH-FW Confi guration

 Trusted Computing

 NCT6106D Super IO Confi guration

 NCT6106D HW Monitor

 Serial Port Console Redirection

 USB Confi guration

 Network Stack Confi guration

 CSM Confi guration

 Intel(R) Rapid Storage Technology

Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
2. The screen displays all available drives. Select "Create RAID volume" to create a RAID
volume".
3. Use the up or down arrow keys to select the RAID level and press <Enter>.
4. Use the up or down arrow keys to scroll through the list of hard drives and press <Enter>
to select the drive.
5. Press <Enter>.
6. Use the up or down arrow keys to select the strip size and press <Enter>.
7. Enter the volume size and press <Enter>.
8. At the prompt, press <Y> to confirm volume creation.
Chapter 5 RAID
Chapter 5
System ACPI Parameters.
 Select Screen
 Select Item
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Step 4: Install the Intel Rapid Storage Technology Utility
The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows
RAID volume management (create, delete, migrate) from within the operating system. It will
also display useful SATA device and RAID volume information. The user interface, tray icon
service and monitor service allow you to monitor the current status of the RAID volume and/
or SATA drives. It enables enhanced performance and power management for the storage
subsystem.
Pleaser refer to the chapter 4 to install the IRST driver.
63
www.dfi .com