DFI CS630-Q370 User Manual page 49

Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Chipset
SATA And RST Confi guration
SATA Controller(s) [Enabled]
SATA Speed [Auto]
SATA Mode Selection [AHCI]
Serial ATA Port 0 Empty
Port 0 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 1 Empty
Port 1 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 2 Empty
Port 2 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 3 Empty
Port 3 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 4 Empty
Port 4 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 5 Empty
Port 5 [Enabled]
Hot Plug [Disabled]
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
SATA Controller(s)
This field is used to enable or disable the Serial ATA controller.
SATA Speed
Select the SATA speed: Auto, Gen1, Gen 2 or Gen3.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI
This option allows the Serial ATA controller(s) to use AHCI (Advanced Host Controller
Interface).
Intel RST Premium With Intel Optane System Acceleration (for CS630-Q370
only)
This option allows you to create RAID or Intel Rapid Storage configuration with Intel
Optane system acceleration on Serial ATA devices.
™
Serial ATA Port 0/1/2/3/4/5 and Hot Plug
Enable or disable the Serial ATA port and its hot plug function.
Chapter 3 BIOS Setup
Chapter 3
Enable/Disable SATA
Device.
 Select Screen
 Select Item
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
®
49
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Chipset
HD Audio Subsystem Confi guration Settings
HD Audio [Enabled]

Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
HD Audio
Control the detection of the HD Audio device.
Disabled
HDA will be unconditionally disabled.
Enabled
HDA will be unconditionally enabled.
Control Detection of the
HD-Audio device.
Disabled = HDA will be
unconditionally disabled
Enabled = HDA will be
unconditionally enabled.
Select Screen

Select Item

Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi .com