Set Up Instruction - netvox R718PA1 User Manual

4. Set Up Instruction

On/Off
Power on
Turn on
Turn off
(Restore to factory setting)
Power off
Note
Network Joining
Never joined the network
Had joined the network
(Not reset to the factory setting)
Fail to join the network
Function Key
Press and hold for 5 seconds
Press once
DC12V adapter
DC12V power supply, the green indicator flashing once means turn on
successfully.
Press and hold the function key for 5 seconds till the green indicator
flashes 20 times.
Remove DC12V adapter.
1. The first 5 seconds after power on, the device will be in engineering
test mode.
2. On/off interval is suggested to be about 10 seconds to avoid the
interference of capacitor inductance and other energy storage
components.
Turn on the device to search the network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Turn on the device to search the previous network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Suggest to check the device verification information on the gateway
or consult your platform server provider.
Restore to factory setting / Turn off
The green indicator flashes 20 times: success
The green indicator remains off: fail
The device is in the network: the green indicator flashes once and
sends a report
The device is not in the network: the green indicator remains off
4