Advertisement
4. Set Up Instruction
On/Off
Power On
Turn On
Turn Off (Restore to factory setting)
Power Off
Note
Network Joining
Never Join the Network
Had Joined the Network
(Not restore to the factory setting)
Fail to Join the Network
Function Key
Press and Hold for 5 Seconds
Press once
DC12V adapter
DC12V power supply, the green indicator flashing once means
turn on successfully.
Press and hold the function key for 5 seconds, and the green
indicator flashes 20 times.
Remove DC12V adapter
1. On/off interval is suggested to be about 10 seconds to avoid the
interference of capacitor inductance and other energy storage
components.
2. Five seconds after power on, the device will be in engineering
test mode.
Turn on the device to search the network.
The green indicator keeps on for 5 seconds: success.
The green indicator remains off: fail
Turn on the device to search the previous network.
The green indicator keeps on for 5 seconds: success.
The green indicator remains off: fail.
Suggest checking the device registration information on the
gateway or consulting your platform server provider if the device
fails to join the network.
Restore to the original setting / turn off
The green indicator flashes 20 times: success
The green indicator remains off: fail
The device is in the network: the green indicator flashes once and
the device sends a data report
The device is not in the network: the green indicator remains off
4
Advertisement
