Features; Set Up Instruction - netvox R718PA7 User Manual

3. Features

⚫ SX1276 wireless communication module
⚫
DC 12V adapter power supply
⚫
Main body: IP65/IP67 (Optional)
⚫ Main body adopts PG7 waterproof fixed joint
⚫ Magnetic base
⚫
RS485 communication
Noise sensor lifespan: 1 – 2 years
⚫
⚫ Compatible with LoRaWAN
⚫ Frequency hopping spread spectrum
⚫
Configuration parameters can be configured via a third-party software platform, data can be read and alerts can be set via SMS
text and email (optional)
⚫ Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne

4. Set up Instruction

On/Off
Power on
Turn on
Restore to factory setting
Power off
Note
Network Joining
Never joined the network
Had joined the network
(without resetting to factory setting)
Fail to join the network
(Note: Lifespan may vary due to the environment.)
TM
Class A
DC12V adapter
The green indicator flashing once: success
Press and hold the function key for 5 seconds until the green indicator flashes 20 times.
Remove DC12V adapter.
1. 5 seconds after power on, the device will be in engineering test mode.
2. On/off interval is suggested to be about 10 seconds long to avoid the interference of capacitor
inductance and other energy storage components.
Turn on the device to search the network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Turn on the device to search the previous network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Please check the device verification information on the gateway or consult your platform server
provider.
3