1. Manuals
  2. Brands
  3. netvox Manuals
  4. Security Sensors
  5. R718PA1
  6. User manual

netvox R718PA1 User Manual

Wireless co sensor
Hide thumbs Also See for R718PA1:
Table of Contents

Advertisement

Quick Links

Download this manual
R718PA1
Wireless CO Sensor
Wireless CO Sensor
R718PA1
User Manual
Copyright© Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of NETVOX Technology. It
shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without
written permission of NETVOX Technology. The specifications are subject to change without prior notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R718PA1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for netvox R718PA1

Summary of Contents for netvox R718PA1

  • Page 1 User Manual Copyright© Netvox Technology Co., Ltd. This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without...

  • Page 2: Table Of Contents

    Table of Contents 1. Introduction ....................2 2. Appearance ....................3 3. Features ..................... 3 4. Set Up Instruction ..................4 5. Data Report ....................5 5.1 Example of ReportDataCmd.............. 5 5.2 Example of ReportConfiguration ............7 5.3 Example of GlobalCalibrateCmd ............8 6.

  • Page 3: Introduction

    R718PA1 is a Class A device based on the LoRaWAN protocol of Netvox and is compatible with the LoRaWAN protocol. R718PA1 can be connected to a corresponding carbon monoxide sensor (RS485) to report the concentration of carbon monoxide collected by the device to the corresponding gateway.

  • Page 4: Appearance

    2. Appearance CO Senser Indicator Function Key Adaptor 3. Features ⚫ SX1276 wireless communication module ⚫ 12V DC power supply ⚫ CO detection ⚫ Magnetic base ⚫ Main body protection level IP65 / IP67 (optional) ⚫ Compatible with LoRaWAN Class A ⚫...

  • Page 5: Set Up Instruction

    4. Set Up Instruction On/Off Power on DC12V adapter DC12V power supply, the green indicator flashing once means turn on Turn on successfully. Turn off Press and hold the function key for 5 seconds till the green indicator (Restore to factory setting) flashes 20 times.

  • Page 6: Data Report

    Note: 1. The cycle of the device sending the data report is according to the default. 2. R718PA1 reports the concentration of carbon monoxide. Please refer Netvox LoRaWAN Application Command document and Netvox Lora Command Resolver http://www.netvox.com.cn:8888/cmddoc to resolve uplink data.
  • Page 7 Uplink: 01570500FFFF0000FFFF00 byte (01): Version (57): DeviceType — R718PA1 (05): ReportType (00): Battery — 0V, DC powered – 6 — FFFF(N/A) (FFFF): O – 8 (0000): CO — 0.0ppm, 0000 (HEX) = 0 (DEC), 0* 0.1ppm = 0.0ppm – 10 (FFFF): NO —FFFF(N/A)

  • Page 8: Example Of Reportconfiguration

    ConfigReport MinTime MaxTime Reserved 0x01 (2bytes Unit: s) (2bytes Unit: s) (5Bytes,Fixed 0x00) ConfigReport Status Reserved 0x81 (0x00_success) (8Bytes, Fixed 0x00) R718PA1 0x57 ReadConfig Reserved 0x02 ReportReq (9Bytes, Fixed 0x00) ReadConfig MinTime MaxTime Reserved 0x82 ReportRsp (2bytes Unit: s) (2bytes Unit: s)

  • Page 9: Example Of Globalcalibratecmd

    5.3 Example of GlobalCalibrateCmd FPort: 0x0E Sensor Description PayLoad(Fix =9 Bytes) Type Reserved Channel (1Byte, Multiplier Divisor DeltValue SetGlobalC (2Bytes, 0x01 0_Channel1, (2bytes, (2bytes, (2bytes, alibrateReq Fixed 1_Channel2, etc) Unsigned) Unsigned) Signed) 0x00) Channel (1Byte, Status SetGlobalC 0x81 0_Channel1, (1Byte,0x00_ Reserved (7Bytes, Fixed 0x00) alibrateRsp 1_Channel2, etc)

  • Page 10: Installation

    6. Installation 1. R718PA1 has a built-in magnet (as the figure 2. The device periodically reports the data below). It can be attached to the surface of an iron according to Max Time. The default Max object conveniently and quickly when it is installed.

  • Page 11: Important Maintenance Instructions

    7. Important Maintenance Instructions Kindly pay attention to the following in order to achieve the best maintenance of the product: •Do not put the device near or submerge into water. Minerals in rain, moisture, and other liquids could cause corrosion of electronic components. Please dry the device, if it gets wet. •Do not use or store the device in dusty or dirty environments to prevent damage to parts and electronic components.

Table of Contents