Add A Second Line For A Phone - Paradyne 6501 Installation Instructions Manual

Add a Second Line for a Phone

Models 6501, 6502, 6511, 6512. Use the following procedure to add a new phone line.
Cables Required (Supplied)
H
6-foot phone cable (RJ11)
"
Procedure
Connect the SuperLine IAD:
¶
Plug one end of the supplied phone cable into the LINE jack on the SuperLine IAD
rear panel.
·
Plug the other end of the cable into the wall jack.
Add a Second Phone Line:
¸
Connect a phone to the PHONE 1/2 jack on the SuperLine IAD rear panel.
Connect the Existing Phone Line:
¹
If you wish to have your existing phone line available in this location, connect your
existing phone to the BASE PHONE jack on the SuperLine IAD rear panel.
Connect the AC Power Transformer:
º
Plug the power transformer into an ac outlet and the POWER jack on the
SuperLine IAD rear panel.
Complete the Installation:
l
If you have not yet attached phone filters to all your existing phones or other
devices attached to the same line as the SuperLine IAD, do so now. Refer to
Connect Phone Filters to Your Existing Phones and Other Devices on page 4.
Your SuperLine IAD installation is now complete.
8