Table of Contents
Advertisement
OPERATING AND MAINTENANCE MANUAL FOR TIER 4 SNOW
BLOWER MODELS: RPM215, RPM217, RPM220/36R, RPM40R,
RPM48R/52R AND HS300
This manual has been prepared to help you with the daily operation and maintenance of your
new RPM TECH snow blower.
Your snow blower has been designed and built to give maximum performance, economy and
ease of operation under a wide variety of conditions. Prior to delivery, the snow blower was
carefully inspected, both at the factory and by your dealer to ensure that it reaches you in perfect
condition. To maintain performance and ensure trouble-free operation, it is important that
routine servicing, as specified in this manual, be carried out at the recommended intervals.
Read this manual carefully and keep it in a convenient place for future reference. If, at any time,
you require information concerning your snow blower, do not hesitate to contact your authorized
RPM Tech dealer. It has factory-trained personnel, genuine parts and the necessary equipment
to carry out your service requirements.
A vehicle identification plate is located on the right-hand side of the blower head, these numbers
should be provided to your RPM Tech dealer should your snow blower requires servicing or
parts.
All data provided in this book are subject to production variations. Dimensions and weights are
approximate only, and the illustrations do not necessarily show snow blower in standard
condition.
For accurate information concerning any snow blower, please refer to your nearest RPM Tech
dealer.
For environmental concerns, in accordance with our ISO 14001 policy, environmental notices
are indicated by the following pictogram.
S00-OME-T4 rev 7
Foreword
Page 4
Advertisement
Table of Contents
