Table 6 Command output
Field
Current state
Hardware Address
Description
Bandwidth
PVID
Port link-type
Trunk port encapsulation
Last clearing of counters
Input (total): 6 packets, 384 bytes
Output (total): 18 packets, 1152 bytes
Link
Duplex
Cause
Related commands
reset counters interface
evb default-manager
Use evb default-manager to specify the default VSI manager.
Use undo evb default-manager to restore the default.
Description
Interface status:
•
Administratively DOWN—The interface is administratively down.
•
DOWN—The interface is administratively up but physically down.
•
UP—The interface is both administratively and physically up.
Hardware address of the interface.
Description information for the interface.
Expected bandwidth for an S-channel interface or a VSI interface.
Default VLAN ID of the interface.
Link type of the interface.
Encapsulation type of the trunk port.
Last time the reset counters interface command was executed to clear
interface statistics.
Never indicates interface statistics have never been cleared since
startup.
Total number of packets and bytes that the S-channel interface
received.
Total number of packets and bytes that the S-channel interface sent.
Physical connection status of an interface:
•
UP—The link is physically up.
•
DOWN—The link is physically down.
•
ADM—The link is administratively down.
•
Stby—A standby interface.
Duplex mode of an interface:
•
(a)/A—Autonegotiation.
•
H—Half-duplex.
•
F—Full-duplex.
Causes of a DOWN link:
•
Administratively—The interface was shut down by executing the
shutdown command. To restore the physical state of the interface,
use the undo shutdown command.
•
Not connected—No physical connection because of absence or
failure of network cables.
12