HPE S5830V2 Series Command Reference Manual page 13

Parameters
interface: Specifies an interface. If you do not specify an interface, the command displays EVB TLV
negotiation information for all interfaces with EVB enabled.
interface-type { interface-number | interface-number:channel-id }: Specifies a Layer 2 Ethernet interface,
Layer 2 aggregate interface, S-channel interface, or an S-channel aggregate interface by its type and
number. The interface-number argument specifies a Layer 2 Ethernet interface or Layer 2 aggregate
interface. The interface-number:channel-id argument specifies an S-channel interface or S-channel
aggregate interface.
Examples
# Display EVB TLV negotiation information for Ten-GigabitEthernet 1/0/1.
<Sysname> display evb evb-tlv interface ten-gigabitethernet 1/0/1
S-Channel1/0/1:1
EVB mode
BGID status
Local RR capability
Local RR status
Remote SGID status
Remote RR request status
Remote RR status
Max ECP retry time
ULPPDU retransmission exponent : Local-16/Remote-NA/Operative-16
Resource wait-delay exponent
Reinit Keep-alive exponent
S-Channel1/0/1:100
EVB mode
BGID status
Local RR capability
Local RR status
Remote SGID status
Remote RR request status
Remote RR status
Max ECP retry time
ULPPDU retransmission exponent : Local-16/Remote-NA/Operative-16
Resource wait-delay exponent
Reinit keep-alive exponent
Table 2 Command output
Field
EVB mode
BGID status
: Local-bridge/Remote-station
: Supported
: Supported
: Disabled
: Not supported
: Not requested
: Unknown
: Local-3/Remote-NA/Operative-3
: Local-20/Remote-NA/Operative-20
: Local-25/Remote-NA/Operative-25
: Local-bridge/Remote-station
: Supported
: Supported
: Disabled
: Not supported
: Not requested
: Unknown
: Local-3/Remote-NA/Operative-3
: Local-20/Remote-NA/Operative-20
: Local-25/Remote-NA/Operative-25
Description
EVB mode:
•
bridge—EVB bridge.
•
station—EVB station.
Support for Group ID on the EVB bridge:
•
Supported.
•
Not supported.
5