HPE S5830V2 Series Command Reference Manual page 19

Table of Contents

Advertisement

Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
PVID: 1
Port link-type: trunk
VLAN Passing:
1(default vlan), 2
VLAN permitted: 1(default vlan), 2
Trunk port encapsulation: IEEE 802.1q
Last clearing of counters: Never
Input (total):
6 packets, 384 bytes
Output (total):
18 packets, 1152 bytes
# Display brief information about the S-channel interface S-Channel 1/0/1:10.
<Sysname> display interface s-channel 1/0/1:10 brief
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
SCH1/0/1:10
# Display detailed information about the VSI interface S-Channel 1/0/1:10.1.
<Sysname> display interface s-channel 1/0/1:10.1
S-Channel1/0/1:10.1
Current state: UP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000c-29f9-366e
Description: S-Channel1/0/1:10.1 Interface
Bandwidth: 1000000kbps
Last clearing of counters: Never
# Display brief information about the VSI interface S-Channel 1/0/1:10.1.
<Sysname> display interface s-channel 1/0/1:10.1 brief
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
SCH1/0/1:10.1
# Display brief information about all S-channel interfaces and VSI interfaces in DOWN state.
<Sysname> display interface s-channel brief down
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface
SCH1/0/1:11
SCH1/0/1:11.1
Link Speed
Duplex Type PVID Description
UP
10G(a)
F(a)
Link Speed
Duplex Type PVID Description
UP
--
--
Link Cause
DOWN Not connected
DOWN Not connected
11
T
1
--
--

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5820v2 series

Table of Contents