Main Display; Display Modes - Matrox Odyssey XG Installation And Hardware Reference

Important
Connector #1
SingleHead DVI
RGB
DualHead RGB
RGB
RGB
DVI
DVI
DVI
TripleHead RGB
RGB
DVI
DVI
Whenever you change your connection setup, make sure you are using the correct
connectors and that all connectors are properly fastened.
Whenever you restart your computer, make sure your monitors are already turned
on. Otherwise, the software might not be able to properly detect your monitors.

Main display

Your Matrox board supports up to three displays. By default, the display connected
to connector #1 will be selected as the main display. For information on how to
modify this arrangement, as well as the other features of the included Matrox
software, refer to the Software installation chapter.

Display modes

The maximum resolution used with Matrox Odyssey XG will vary depending on
the type and number of displays connected to the board. The following table lists
all combinations of display type and resolutions:
Resolution on #1
1600x1200 @ 60Hz
2048x1536 @ 85Hz
1920x1440 @ 60Hz
1920x1440 @ 60Hz
1920x1440 @ 60Hz
1600x1200 @ 60Hz
1600x1200 @ 60Hz
1600x1200 @ 60Hz
1280x1024 @ 85Hz
1280x1024 @ 85Hz
1280x1024 @ 85Hz
1280x1024 @ 85Hz
Connector #2 Resolution on #2
DVI 1600x1200 @ 60Hz
RGB 2048x1536 @ 85Hz
RGB 1920x1440 @ 60Hz
TV NTSC/PAL
DVI 1600x1200 @ 60Hz
DVI 1600x1200 @ 60Hz
RGB 1920x1440 @ 60Hz
TV NTSC/PAL
RGB+TV 1280x1024 @ 85Hz + NTSC/PAL
DVI+TV 1280x1024 @ 85Hz + NTSC/PAL
RGB+TV 1280x1024 @ 85Hz + NTSC/PAL
DVI+TV 1280x1024 @ 85Hz+ NTSC/PAL
Display modes 13