Matrox Meteor-II Installation Manual page 8

8 Chapter 1: Overview and hardware installation
Subrack
CompactPCI
Board
Handle
5. When the board is in place, the handle opens automatically, exposing a screw.
Tighten both this screw and the one at the top of the bracket.
Your Matrox board is now installed. Before restarting your computer, connect your
monitor or monitors (see Connecting display devices). After connecting, restart your
computer and install your Matrox software (see Software installation).
Guide slots
Screw
Guide
Back plate
of subrack
CompactPCI
connector