Lutron Electronics WAC-2019SD Operation Manual page 45

12-6 Decimal point of SD card setting
The numerical data structure of SD card is default used
the " . " as the decimal, for example "20.6" "1000.53" .
But in certain countries ( Europe ...) is used the " , " as
the decimal point, for example " 20,6 " "1000,53".
Under such situation, it should change the Decimal
character at first.
When the " DECIMAL POINT " text is yellow color
1) Press "Enter" into the setting function,then use the " ▲ Button
" ( 3-5, Fig. 1 ) or " ▼ Button " ( 3-6, Fig. 1 ) to select the
upper text to " USA " or " EURO ".
USA - Use " . " as the Decimal point with default.
EURO- Use " , " as the Decimal point with default.
2) After select the upper text to " USA " or " EURO ",
press the " Enter Button " ( 3-8, Fig. 1 ) will save the
setting function with default.
12-7 Select the Temp. unit to
When the " TEMPRATURE UNIT " text is yellow color
1) Press "Enter" into the setting function,Then use the " ▲ Button
" ( 3-5, Fig. 1 ) or " ▼ Button " ( 3-6, Fig. 1 ) to select the upper
Display text to " C " or " F ".
C - Temperature unit is ℃
F - Temperature unit is ℉
℃ ℉
or
43