Harmony System Parameters - Yamaha MU100R Owner's Manual

Harmony System Parameters

Path: [UTIL] button
These parameters include the MIDI channel settings for the harmony and
melody. For general information on the Harmony effect and how to use
it, refer to the Guided Tour section, page 77.
Harmony Channel (Harmony Ch)
Settings: off, 1 - 16
This determines the MIDI channel over
which the Harmony effect is controlled.
For example, when this is set to the same
value as the MIDI transmit channel of a
connected MIDI keyboard and the Vo-
coder or Chordal Harmony Type is se-
lected (page 147), you can use the key-
board to "play" harmonies. (See page 77.)
Melody Channel (Melody Ch)
Settings: off, 1 - 16
This determines the MIDI channel over
which the lead sound of the Harmony ef-
fect is controlled. For example, when this
is set to the same value as the MIDI trans-
mit channel of a connected MIDI key-
board, you can use the keyboard to con-
trol the pitch of the lead sound.
VL Voices and Harmony System Parameters (PLUGIN)
"PLUGIN"
Utility Mode
"PLG100-VH"
171