Yamaha MU100R Owner's Manual page 171

System Functions (SYS)
Display Bank Select (DispBankSel)
Settings: 1 (displays only banks with
unique Voices),
2 (displays all banks)
This determines whether the MU100R
displays all Voice banks or not when
changing banks. (For information on
changing banks, see page 28.) When this
is set to "1," the MU100R conveniently
skips over banks that have the same Voice.
In other words, when you step through
the available banks, the display stops only
on banks for which the Voice is unique or
different (for the selected program num-
ber). If "2" is selected, all banks are dis-
played in succession, regardless of
whether the Voices are the same or not.
The Display Bank Select setting itself
cannot be changed by incoming MIDI
messages.
160
Voice Map (Map)
Settings:
This determines the Voice configuration
or assignment of the XG Voice set of the
MU100R. This parameter should be set
to match particular types of song data.
For playback of data recorded on or in-
tended for the MU90R, MU80, and
MU50, set this to "MU basic." For play-
back of other GM- and XG-compatible
data, as well as the most recent song data
(especially that intended for the
MU100R), this should be set to
"MU100Native."
NOTES
• Only the Voice map of the basic Voice
bank (MSB = 0, LSB = 0) is affected by this
parameter. The other extended Voice
banks are not affected.
• This setting is not affected by incoming XG
System On or GM System On MIDI mes-
sages.
Utility Mode
MU basic, MU100Native