Yamaha MU100R Owner's Manual page 174

Multi
Settings: 32 Parts, 16 Parts, 32 Parts + A/D, 16 Parts + A/D
This transmits the selected MU100R Multi Part data (including
System, Effect and EQ data) to the connected device. (Use the
VALUE -/+ buttons to select the type/amount of data to be
transmitted.)
Performance (PERFORM)
Settings: ALL, I 001 — I 100 (Internal Performance numbers)
This transmits the selected MU100R Performance data to the
connected device. (Use the VALUE -/+ buttons or data dial to
select the type/amount of data to be transmitted.)
4 From the "Are you sure?" prompt, press the ENTER button to
execute the operation, or press the EXIT button to cancel it and
return to the Dump Out menu.
A "Transmitting..." message appears in the display during the
operation. When the transmission is completed, the MU100R
returns to the Dump Out menu.
NOTE
If you have more than one MU100R connected in your MIDI system and wish to send
different sets of data to each, you can specify a different Device Number for each. (See page
98.) You should set the Device Number on each MU100R you use, before dumping the data
to a data storage device. Then, when you reload the data to the connected MU100Rs, each
unit will automatically receive only the data that has the corresponding Device Number.
Utility Mode
Dump Out Functions (DUMP)
163