Rear Panel - Yamaha MU100R Owner's Manual

Rear Panel

1
1 MIDI THRU, MIDI OUT and MIDI IN A/B terminals
For connection to other MIDI devices, such as a MIDI keyboard, tone genera-
tor, sequencer, or to a computer that has a MIDI interface. MIDI IN A and B
are independent MIDI ports, allowing full 32-channel MIDI input. MIDI OUT
is for data dumps to another MIDI device, while MIDI THRU is for "daisy-
chain" connection of additional MU100Rs or other MIDI instruments. (See
page 17 for more information on MIDI connections.)
2 HOST SELECT switch
For selecting the type of host computer. (See page 19.)
3 TO HOST terminal
For connection to a host computer that does not have a MIDI interface. (See
page 19.)
4 DC IN jack
For connection to the PA-5B AC power adaptor.
5 OUTPUT R, L/MONO jacks (Right, Left/Mono)
For connection to a stereo amplifier/speaker system. When using a mono sys-
tem, connect it to the L/MONO jack.
6 INDIV. (Individual) OUTPUT 1, 2 jacks
For independent output of selected Parts (1/4" jack). Parts selected for output
through these jacks are not output through the main OUTPUT or PHONES
jacks. (See pages 113 and 118.)
2 3 4
The Controls of the MU90R
The Controls of the MU100R
5 6
3