Yamaha MU100R Owner's Manual page 33

Setting Up the MU100R in Your Music System
5 Start up your music software.
If necessary, set up the appropriate options on the software for
operation with the MU100R. The relevant settings may be found
in menu(s) called "Studio Setup," "System Setup," or "MIDI
Setup."
In this menu, you should be able to set separate MIDI outputs to access the
two MIDI ports on the MU100R. For example, MIDI OUT 1 should be set
to "Yamaha CBX A Driver" (or "Windows MIDI, Output 1"). Similarly,
MIDI OUT 2 should be set to "Yamaha CBX B Driver" (or "Windows MIDI,
Output 2").
(The specific menu/parameter names may differ depending on your particu-
lar music software. For detailed instructions, refer to the owner's manual or
on-line help of the software.)
Hint
If you have a second multi-timbral tone generator (such as the MU50), you can
connect it to the MIDI OUT terminal of the MU100R and have three independent
MIDI ports (for 48-channel operation). The software settings above apply here as
well: Set MIDI OUT 3 should be set to "Yamaha CBX C Driver" (or "Windows MIDI,
Output 3"). (For more information, see page 159.)
Once you've set up the MU100R in your system, check that the MU100R is
properly receiving data.
22
Guided Tour